In the 40 years of experience in the construction of construction machinery, Magisa was able to use the active collaboration of the customer up to obtain patents. Magisa only builds with quality materials and parts selected with the utmost care, produced by known companies. The dislocation logistics of these companies allows easy retrieval of spare parts anywhere in the world. The production is diversified with a wide range of models, from 20 to 180 hp with different depths of cut.
Magisa is able to meet special customer requirements thanks to the extreme possibility of customization of its machines. Another strong point of Magisaè machines ease of use by the operator, who is able to obtain from them the maximum yield in a short time.
All the machines we manufacture meet the directives of the European Community (EC).
High working efficiency and high economic profit:
It will exploit 200 cubic meters stone block in 24 hours, the cost is 14 usd per cubic meter. It’s only 40% of the cost than traditional blasting exploiting way..
High safety performance:
Using the new block exploiting way of stone block cutting machine without detonator explosives, both to ensure the safety of the work site, but also to avoid the detonator explosives into the community, effectively eliminating the security risks.
The cylindrical guide rail is fully sealed to ensure that the guide rail id pollution-free and machine has an original lubrication system, so the service life and utilization ratio are effectively increased and maintenance times and costs are reduced. It is a mine quarrying machine with significantly increased comprehensive benefits.
Unique cylindrical guide, hydraulic elevator design and super wide chassis, so the structure is more stable and longer service life.
Equipped with supergiant large diamond saw blades, it can be used for the processing of ultra-large rocks and blocks to improve outturn percentage of the mine and make full use of the mineral resource.
Large diamond saw blades is more secure, environmental, lower cost and more efficient than traditional blasting mining method.
This machine combine domestic and overseas advantages to developed. The main motor use transducer control step less speed regulation. Walking also control by transducer speed regulation wide range.and with brake overload protect and have different start moment. Machine low failure rate, stable performance, high efficiency and so on , it is the mine over best quarry equipment .
NO. KSJ7.5-700 (marble) KSJ11-700 (marble) KSJ22-800 (marble) KSJ30-800 (marble) KSJ37-800 (marble) KSJ45-800 (marble) KSJ37-800 (granite) KSJ45-800 (granite)
Diamond wire diameter ф8-ф10mm ф8-ф12mm ф8-ф12mm ф8-ф12mm ф8-ф12mm ф8-ф12mm ф8-ф12mm ф8-ф12mm
Length of wire 15-30M 15-50M 15-100M 15-120M 15-150M 15-150M 15-150M 15-150M
Main motor power 7.5KW 11KW 22KW 30KW 37KW 45KW 37KW 45KW
The change way for wire wheel Manual 360 。 Electric 360 。
The length of guide rail 3 X 2M 3 X 2M 3 X 2M 3 X 2M 3 X 2M 3 X 2M 3 X 2M 3 X 2M
Water consumption 3m3 /h 4m3 /h 6m3 /h 8m3 /h 10m3 /h 10m3 /h 10m3 /h 10m3 /h
Gross weight 900kg 1300kg 2200kg 2500kg 2800kg 3200kg 3500kg 3800kg
The Pushing Steel Bag is widely used in the marble and stone quarrying industry, specially for stripping blocks from the mountain.
The revolutionary aspect of the Pushing steel bag / HYDRO-BAG equipment lies basically in the possibility of stripping blocks up to 1000 tons or more, without the need to prepare slots to house the jacks since the HYDRO-BAG has an original thickness of just 2 mm (0.08") and can be easily slipped into the wire saw cut.
A complete Pushing Steel Bag / HYDRO BAG equipment consists of:
1. Electric or pneumatic pump unit to create the pressure for the cushions;
2. Safety valves and distribution valves;
3. Pipes, cocks and inlet filters;
4. Quick couplings;
5. A series of HYDRO-BAG cushions.
This machine is fit for granite, marble, limestone, travertine,basalt and sand stone cutting. High speed, high efficiency,low cost,environment friendly.That is why all China stome mine use this machine to cut quarry. In some medium hardness granite mine, 3600mm machine can cut 300 meters in 15 hours! Structure Characteristics： 1. It has a compact structure, with mechanical system, hydraulic system and electrical system integrated, high degree of automation, simple operation and easy-to-use feature. 2. The cylindrical guide rail is fully sealed to ensure that the guide rail id pollution-free and machine has an original lubrication system, so the service life and utilization ratio are effectively increased and maintenance times and costs are reduced. It is a mine quarrying machine with significantly increased comprehensive benefits. 3. Unique cylindrical guide, hydraulic elevator design and super wide chassis, so the structure is more stable and longer service life. 4. Equipped with supergiant saw blades, it can be used for the processing of ultra-large rocks and blocks to improve outturn percentage of the mine and make full use of the mineral resource. 5. Disc saw blades cutting is more secure, environmental, lower cost and more efficient than traditional blasting mining method. The efficiency is aboutt 4 times compare to wire saw machine! At present, we have developped many types including 3300mm,3500mm,3600mm,4200mm,4500mm,4800mm. And we can design special machine according to your request! We have exported this machine to many countries around world ! Hope you can try! Please feel free to contact us if you have any question in it!
This is a small,practical and silent jaw crusher to make gravels.
Good for stone fabricators to make leftover stone valuable.
The reinforced mouth gives long life of the machine.
The machine is equipped with the separator.
Dimensions: 1650 x 2050 x 1770
Power H75-G: 75 cv
Power H60-G: 60 cv
Cutting Speed: 0-44 m/seg (con variador de frecuencia)
Max. Speed. Cart Displacement: 0.8 m/min.
• Big reach advantage over dedicated hydraulic drill rigs
• Very quick setup times between holes
• Ideal for blast hole, pipeline, pre-shear, rock bolting and drilling with casing
• Incredible geometry for drilling
• Hydraulic drill performance & reliability
• Lower capital cost than a dedicated drill rig
• Excellent mobility
• Operator health and safety
The bottom line
Traxxon Rock Drills has been building drills from the ground up for over 40 years. We manufacture every one of our products using the highest quality components, dedicated skilled technicians and using our decades of experience. We are customer focused and driven. Our goal is simply to help you lower your drilling costs and increase your bottom line, the power to drill more for less.
Model:...........Sandvik HL300 (other options available)
Percussion:.......8 kW (10.73 hp)
Weight:.............94 kg (207lbs)
Hole Range:.........35mm - 64mm (1-3/8” – 2.5”)
Hole Depth: .....15m (50’)
Attachment & feed assembly
Feed Beam: ..........High Tensile steel
Drill Guides:.................Adjustable & replaceable bronze
Drill Travel:..................Heavy duty chain & hydraulic drive motor
Steel Length:....................3700mm (12’) maximum length
Hose Control:.............Drifter mounted hanger, travels with drifter
Centralizer:...Hydraulic with replaceable hardened bushings
Feed Swing:...................40° by hydraulic cylinder
Feed Dump: ..................180° Carrier bucket cylinder
Mounting:......................Quick attach bucket mount on boom stick
Storage: .........................Built in stand
1. Broad applicability: suitable for all kinds of stone quarry.
2. High productivity: Cutting depth can reach 20 meters with fast cutting speed, about 2.5~12 m2/h according to different hardness.
3. Machine can rotate at 360 degree, so it’s workable to cut vertical, horizontal or tilting surface.
4. Low cost: The cutting surface is smooth with less saw kerf, and without any break, so that waste rate is very low.
5. Safe and green: the machine is operated separately with low noise and dust, low working intensity and high safety rate.
6. High automation: the machine can be operated easily by PLC with very simple operation panel.
Electrical distribution board and control board installed on machine. Unibody machine helps easy transportation. Main power (input) cable plug-in and run. Automatic feed motion gives two different speed.
-Main Motor : 75hp 1500 Rpm
-Feed Motian Motor: 1.5 Hp 1500 Rpm
-Flywheel Daiameter: 800 Mm.
-Rails: 2 Mt. 3 Ea (Total 6mt.)
-Guilde Flywheel : Ø300 Mm.
-Rotatian Main Flywheel: each position-36
-Cuttuing Speed:10 -25 m2/hour
(Related Stone Hardnees)
Elect. Compounds : Siemens