My favorites
  • Machinery
  • Supplier
  1. Country / Region:
  2. Year Established:
    Dec 30,1925
  3. Business Type:
  4. Main Products:
    diamond wire machines, diamond belt sawing, quarry chain saw machine
Main Product
Quarry Machines->Quarry Wire Saw Machine
Usage: Granite,Marble,Limestone,Onyx,Quartzite,Sandstone,Travertine
FeaturesDesc: Built with high quality components, the vip 916 is robust and reliable diamond wire saw. It can perform cuts of very large surfaces in any type of stone: marble, limestone, granite and sandstone. The VIP 916 is equipped with the following options of main electric motor: 37 kW (50 hp), 45 kW (60hp), 55 kW (75 hp) and 75 kW (100 hp). The start can be either via a star/triangle system or via inverter. The inverter allows to vary and to adjust the diamond wire speed from 0 to 40 m/sec. The VIP 916, with only one positioning operation, allows to make two parallel cuts with spacing of 1.75 m or 2 m. The VIP 916 is equipped with a hydraulic unit controlling both the rotation and the lateral movement of the head. The head rotation is via robust center plate and a hydraulic motor. The lateral head movement is via two chrome plating supporting stems and one hydraulic cylinder. The VIP 916 travel movement on the rails is by means of a pinion / rack system. There are two available different options of travel system: the first, called “TC”, consists of a central hung rack fixed on the rails. The second one, called “TI”, features two side racks, carved on the track bars. Both systems can be supplied with automatic travel speed control either via D.C. motor and electronic card, or via asynchronous motor controlled by inverter. The VIP 916 power board is installed inside the machine. If provided, the inverter, equipped with a special ventilation system, is mounted inside the frame case, hence well protected against dust and moisture. The machine is equipped with a portable, compact and a waterproof control panel, for all the controls and adjustments during the cut. The double-inverter version, one for the main motor and one for the travel movement on the rails, is equipped with PLC. This version comes with a portable control panel either electromechanical or touch-screen. The version with touch-screen and related software allows to interface with the operator, with automatic storage and processing of all the data related to cuts, which are essential for an accurate management of the cutting operation. A remote panel without cable, controlling all the positioning and operational functions of the machine, can be supplied as an option.
View Detail
Quarry Machines->Stone Chain Saw Machines->Backhoe Squaring Chain Saw
Usage: Marble,Limestone,Quartzite,Sandstone,Travertine
FeaturesDesc: Chain saws machines, Stationary machines for laboratory / sawmill Chain saw machine The chain saw model CST 965 is a cutting chain mounted on the rear of a wheeled tractor cab, called Terna. The machine is self powered and is autonomous both in handling and positioning. It can perform vertical cuts up to the maximum depth of 3.25 meters on marble, limestone and stone materials of similar hardness. The machine is ideal for squaring blocks and for the making series of front cuts. Arms and chains are available for cutting up to 3.25 meters. Our company offers the possibility to mount the following chains in order to optimize cutting performance on different materials: chains 38/40/42 mm with 8 edges tools 42 mm chain with 4 edges tools ; 38/40/42 mm chain with PCD tools for hard stones TECHNICAL FEATURES Terna CST 965 Arm rotation 90° Vertical stroke 3000 mm Orizontal stroke 2000 mm Available lenghts of arm (Useful cut) da/from 2 m – a/to 3.25 m Cut width 38-40-42 mm Weight of cutting unit 3500 kg Total weight, including tractor 10.000 kg Grease tank capacity 7 kg Grease capacity 0,3 – 1 kg Hydraulic oil tank capacity 150 litri / litres Diesel comsumption 7 – 10 l/h Round per minutes of the chain rotation pinion 65 rpm Round per minutes of the diesel engine 1400-1500 rpm Rear gear movement maximum slope 21% Accessories for chain saw VACUUM Vacuum designed to remove large quantities of dust and of the waste granular material produced by the chain saw cutting. The waste material is removed from the accumulation zone adjacent to the cut by means of a fl exible hose and of a suction cup. The vacuum can be installed on a trailer moving on the rails along with the chain saw. The waste material is deposited on the ground, in the opposite side of the cut. WORM Worm designed to carry and to remove automatically large quantities of dust and of the waste granular material produced by the chain saw cutting. The cut waste material is carried in the feed-box of the worm, and then deposited on the ground, at 2 meters distance from the cut. CHAINS 1 – CHAIN PITCH 121MM Larghezza di taglio 38 mm Sono disponibili portainserti per utensili tipo: – WIDIA 8 Taglienti – PCD Ø 13 mm – PCD 8 mm 2 – CHAIN PITCH 110MM Cutting width 42 Available toolholders for tools type: – WIDIA 4 Cutting edges – PCD Ø 13 mm – PCD 9.4 mm 3 – MONO-LINK CHAIN 74 MM PITCH Cutting width 42 Available toolholders for tools type: – WIDIA 4 Cutting edges – PCD Ø 13 mm – PCD 9.4 mm
View Detail
Contact Details
Federico Benetti
Telephone: +39-585 844347-8
Fax No: +39-585 842667
Company Address: Via Provinciale Nazzano, 20 54033 Carrara (MS) ITALIA
Send a message to this supplier