1. Home
  2. Factory Machines
  3. Stone Factory Cleaning Equipments

Stone Factory Cleaning Equipments

(5 products)
Categories:
Stone Block Cutting Machines Stone Slab Cutting Machines Stone Tile Cutting Machines Stone Surface Processing Machines Resin Line Machines Stone Finishing, Profiling Machines Stone Factory Cleaning Equipments Stone Handling, Loading Machines
Country:
China Italy
Add To Compare
wet dust collector machine
Type: Stone Factory Cleaning Equipments Air Dust Collector
Warranty: 6 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The appearance of the machine is beautiful and the operation is easy.Dust generated in the process of grinding, cutting, washing etc will be sucked into the device and decontaminated then discharged.The machine has strong anti-corrosion effect with the stainless steel tank.The machine also can maximum save the electric with the manual function.
Add To Compare
Water recycling systems -DS Series Sludge Dehydrators
Type: Stone Factory Cleaning Equipments Water Treatment Equipment
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The DS model sludge bagger is a multi-bag sludge dehydrator. It resolves the problem of sludge disposal in compliance with current legislation. The sludge, which is decanted into special tanks, is sent through a submersible pump in the containment tank positioned in the upper part of the DS. At this point, the material is manually unloaded inside the filter bags, opening the gate valves located above each bag. The dehydration process lets the residual water ooze through the bag weave, compacting and solidifying the solid material inside the bag itself. Once saturated, the bag is removed from the frame and stored outside to then be disposed of as ordinary solid urban waste.
Add To Compare
Dust Cleaning Equipment
Type: Stone Factory Cleaning Equipments Air Dust Collector
Usage: Granite, Marble
Machinery Function Features:
Dust cleaning equipment is use friendly.The dust produced during grinding,cutting,edge milling,etc.will be absorbed to the machine,after purification then release.We use the PVC filter material,after special technology,it will never been blocked during working.The equipment has automatic cleaning devise.It is easy to maintain and the purify effect could reach over 95%.
Add To Compare
Environmental wet dusting machine
Type: Stone Factory Cleaning Equipments Air Dust Collector
Usage: Granite, Marble, Limestone
Machinery Function Features:
This grinding table is equipped with a multi-layer filter flushing device, so that dust is attached to the water mist, not spillage. The dust removal efficiency of this grinding station is high, the dust dust removal rate can reach more than 95%, and no need to assemble the exhaust pipe. The wind turbine has a high air volume and low noise. Wash-type dust removal, environmental protection, dust through water treatment, forming a mud-like, cleaning will not cause secondary pollution. Depending on the frequency of use, about 20 days to clean the mud in the sink and inject new water.
Add To Compare
Stone Workshop Air Dust Collector-MB Dust extraction systems
Type: Stone Factory Cleaning Equipments Air Dust Collector
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The water wall dust extractor has a double dust suction system. Outside there is a waterfall layer, generated to capture the heavier dust in suspension; inside there is another nozzle reduction system, needed for the complete dust removal of the suctioned air. Our suction cabin is designed for high performance and less maintenance. It is made of prime AISI 304 stainless steel. The MB water wall follows the guidelines of HSE Health and Safety Executive. The operation and use of the MODULBOX MB system requires the operator to work in the front of the module, between the water layer and the linear vacuum opening. The dust produced is vacuumed by the fans through the opening located between the tank and the water layer. At first, part of the dust is reduced by the outer water layer while the rest is stopped by a water atomization system located inside the machine. The module also has a droplet separator that isolates the water atomization system from the suction unit, not allowing the water or dust to be discharged in the air. The purified air comes out from the top of the machine, allowing recirculation in the location. The water flow on the outer layer can be regulated using the gate valves while the flow of the inner water atomization system, for dust reduction, remains constant. It is also possible to access the machine for cleaning and routine maintenance of parts subject to saturation and inevitable wear. An additional fixed or mobile box of various dimensions with a frame in AISI 304 stainless steel and plexiglass panels can be applied to the front allowing the user to work even in areas subject to excessive turbulence. Whenever the laboratory ceiling is not higher than six metres, our anti-turbulence disperser called the PLENUM is recommended. It is powered by: -A power panel that is up to EC standards and American UL-CSA -Submersible pump with pump body and back side impeller in AISI 304 stainless steel -Highly energy efficient motors (category IE3) -Easily removable drawer droplet separators on the front -The containment tank below it is tilted for easy cleaning of the accumulated sludge
  • 1